Woodpeckers | HAND TOOLS Clpz-38-4-22 Clampzilla – 2022 38″ Capacity 4 Pack

Description

Product Summary In addition to keeping your panels flatter, ClampZILLA saves you both time and money. You would need 2 regular bar clamps plus 2 F clamps and a set of clamping cauls to replace one ClampZILLA 4-Way Panel Clamp. Thats four screws that you have to adjust, while ClampZILLA applies vertical and horizontal pressure simultaneously by simply turning one screw. Your boards move into proper alignment as the edges come together. No more anxiety-filled gluing sessions worrying about the glue starting to set before you get just the right amount of pressure on each clamp. ClampZILLAs updated design works with stock from 5/8″ to 4″. For jobs thinner than 5/8″, you can add a piece of 3/4″ material above and below your stock and get all the benefits of ClampZILLAs centered lateral pressure and simultaneous vertical pressure on stock down to 1/4″, or even less. End spacers are no longer needed on thick glue-ups and the vertical pressure is almost double that of the earlier design.  ClampZILLA earned its unusual name when we ran it through some torture testing. It took a three-foot long cheater bar and all of the product developers strength to break the Acme-threaded clamping screw. Just before failure, ClampZILLA was exerting over 6,500 pounds of clamping pressure. And to be honest, it was still exerting that much pressure after failurethe screw broke at the handle.  We designed ClampZILLA for the long haul. The steel bars and clamping pads are powder-coated for a tough, long-lasting finishdried glue usually just pops right off. All the clamping mechanism components are machined from stainless steel, except the clamp screw pivot, which is machined from brass. All machining is done on state-of-the-art CNC equipment right here in our Strongsville facility.   ClampZILLA now comes in 2 sizes, 18″ capacity and 38″ capacity. You can replace the bars in either the 18″ or 38″ clamp with a heavy-duty pair of 52″ bars that give you 50″ clamping capacity on 3/4″ stock. Like all Woodpeckers products, the ClampZILLA 4-Way Panel Clamps are precisely machined and carefully inspected in our Strongsville, Ohio factory (just south of Cleveland). This introductory sale pricing expires on Monday, January 24, 2022. Don’t delay, order yours today! Woodpeckers ClampZILLA 4-Way Panel Clamp places bars on both sides of your stock, joined together by a self-centering scissors joint on both ends. ClampZILLA focuses the lateral pressure on the exact center of your panel (which avoids bowing), while applying vertical pressure to keep the faces correctly aligned. Thats been true for two OneTIME Tool releases of ClampZILLA, but now weve improved it with more attachment points in the bars and a new scissors joint design that applies almost double the vertical clamping pressure and improves clearance on thicker work. Its the best ClampZILLA ever, and its now part of the permanent product line-up at Woodpeckers.